Majilite Medical
About Us Capabilities Technology Products Data Sheets Contact Us
Content Header
 
Data Sheets
Majilite Medical Film
Lansdorf 1000

Product Description
Lansdorf film is a thin cast polyester urethane film possessing uniform thickness with a matte finish, excellent elongation, strength and conformability along with good moisture vapor transmission.

Features and Benefits

  • This film is lightweight with low bulk, flexible and confortable
  • Matte finish gives low slip characteristics
  • Urethane allows moisture vapor and other gases to pass through
  • Clear film you can see through
  • Elastomeric film will stretch and recover
  • Casting process produces a uniform thickness with no gel particles or unseen film orientation

Typical Analytical Values

Standard Color: Clear
Tensile Strength: 5500 psi
Elongation: 435
100% Modulus: 680 psi
Moisture Vapor Trans**: 800 gms/m2/24hr
Liner: 60 lb coated bleached kraft
**ASTM E-96 @ 50% RH with upright cups.

Availability
Lansdorf 1000 film is available from thickness of 0.8 mils to 3+ mils

 

Width

Std. Length

Core Size

Log Roll

58 inches

750 feet

3 inches

Slit Roll

6 inches & wider

750 feet

3 inches

Optional Considerations
Film colors: white, flesh tint and others
Liners with different basis weights
Additives to impart or alter specific properties

Product Safety
The components used in Lansdorf film are listed in Title 21 of the Code of Federal Regulations. In vitro cytotoxicity tests were conducted using MEM elution procedures. Good Manufacturing Practices and the Device Amendments of the Federal Food, Drug and Cosmetic Act place the burden of demonstrating product safety on the device manufacturer.

Majilite warrants that the products sold by it conform to its published specifications, if any, and that the products are merchantable. Test data contained herein pertaining to Majilite’s products, or elsewhere published or provided to the customer by Majilite are believed to be reliable, but unless specifically stated are not to be taken as specifications for products. Majilite does not warrant that products are fit for a particular purpose and the customer is advised to fully determine the suitability of Majilite’s products for his intended use. Majilite does not warrant the non-infringement of United States and foreign patents by the use or sale of the products unless said patents have been called to the attention of Majilite in writing.

 

AP2




 

About Us | Capabilities | Technology | Products | Data Sheets | Contact Us
1530 Broadway Road, Dracut, MA 01852 | 978.441.6800